A100K10602
AlphaCom E User Guide
21
CALL REQUEST
To make a Call Request:
Dial 623 + the station number
●
You will hear a voice message:
“Your call is registered. Please wait.”
The message is spoken in English, German and French.
The display will show:
Call registered.
The LED indicator will fl ash and the station will beep until the
call is answered.
To answer a Call Request at the called station:
Dial 70
●
The display shows the number and name for the fi rst Call
Request sender.
Press 8 to call the sender and delete the Call Request
●
from the list.
There is a notifi cation tone for each Call Request and the LED
indicator will start to fl ash.
The display shows the number of messages at your station
waiting to be answered.
You also have the following options:
0
delete message without answering
1
repeat message
7
go to previous message
9
go to next message
C
disconnect without deleting messages
For handling call requests on stations with displays, the following
codes, that are normally programmed in DAKs, are used:
7638 (Answer)
●
7637 (Up)
●
7639 (Down)
●
7630 (Delete)
●
The Call Request feature is usually used for dialing from a
substation to a defi ned master station. The Call Request number
is programmed on one of the buttons on the substation.
Your call is registered,
please wait.
+
Your call is registered,
please wait.
