Stenograph elan Cybra User Manual Download Page 60

Page: 60 / 68

élan Cybra User Guide

Download the Update to Your Computer

To download the update from the Stenograph web site to your
computer:

1. Connect to the Stenograph web site, www.stenograph.com, and

select

Support/Downloads/élan Cybra

2. Right click on the selected update file to download and choose

Save Target As

. The Save As dialog box displays.

The File name field displays the name of the selected file to
download. Do not alter this name.

3. Select a location on your computer where you want to place the

download file and select

Save

. Stenograph recommends saving

the file to your Desktop.

The File Download dialog box displays until the download
completes copying files to your computer.

4. When the download is complete, the file displays on your

Desktop, if the Desktop was selected for the download location.

5. Load the update onto your élan Cybra. See “Update the

élan Cybra” in this appendix.

Summary of Contents for elan Cybra





































































Search results

Summary of Contents for elan Cybra

Reviews:

Related manuals for elan Cybra

Brands by name

Popular brands

Stenograph elan Cybra, User Manual

Search results

Summary of Contents for elan Cybra

Reviews:

Related manuals for elan Cybra

Brands by name

Popular brands