élan Cybra User Guide
50
6. Do one of the following:
•
Beep Sounds Before Stopping Point
—When you hear the
beep before you feel the stopping point, the key is making
contact too early.
Set the key to make contact later in the downstroke.
Increasing the number on the Accudial allows the key to
make a later contact. For example, turn the dial from 4 to 5,
or if necessary, set the dial between 4 and 5 which is 4½.
•
Beep Sounds After Stopping Point
—When you hear the
beep after you feel the stopping point, the key is making
contact too late.
Set the key to make contact earlier in the downstroke.
Decreasing the number on the Accudial allows the key to
make an earlier contact. For example, turn the dial from
7½ to 7.
7. Once you have made all the adjustments, press the
2nd
and
6th
gray buttons at the same time to exit the adjustment mode. The
élan Cybra beeps when you release the buttons.
Summary of Contents for elan Cybra
