Stenograph elan Cybra, User Manual

Page: 48 / 68

élan Cybra User Guide
48
Testing and Adjusting the Key Contacts
The élan Cybra has a Key Test mode, allowing you to test the
position of the contact point for each key. It is recommended that
you test each key as it is likely each key will require a different
contact point to meet your writing style.
To adjust individual key contacts:
1. Turn the élan Cybra On .
2. Press the 2nd and 6th gray buttons to enter the adjustment
mode. The Speaker icon displays on the LCD.
3. Beginning with the initial S key. Press the key very slowly as
you listen for the beep which indicates the contact point. The
LCD also displays the corresponding block when contact is
made.
At the same time “feel” for the initial resistance or
“stopping point” of the key on the downward stroke. The key
may still be able to move beyond this stopping point.
4. Do one of the following:
•
If you hear the beep and feel the stopping point at the same
time, the key is properly adjusted. Test the next key.
•
If you hear the beep before or after the stopping point, the
key requires adjustment. Continue with the next step.