Stels UTV800 Owner'S Manual Download Page 55

Page: 55 / 139

- 77 -

Age Recommendation

It is strongly recommended that is not

one under the age of 16 be permitted

this UTV800 without adult supervision.

! WARNING

A child driving a UTV800 that is not

recommended for his/her age could

lose UTV800 control and result in

server injury or death.

A child under 16 years holed have adult

supervision when operate on the

UTV800.

No Alcohol or Drugs

Alcohol, drugs and driving don’t mix.

Even a small amount of alcohol can

impair your ability to operate a UTV800

safely. Likewise, drugs, even if

prescribed by a physician, can be

dangerous whiles operating a UTV800.

consult your to be sure it is safe to

operate a vehicle after taking

medication.

! WARNING

Operating this UTV800 after consuming

alcohol or drugs can seriously affect

your judgment, cause you to react more

slowly, affect your balance and

perception, and could result in serious

injury or death.

Never consume alcohol or drugs before

or while operating this UTV800.

Summary of Contents for UTV800












































































































































Search results

Summary of Contents for UTV800

Reviews:

Related manuals for UTV800

Brands by name

Popular brands

Stels UTV800, Owner'S Manual

Search results

Summary of Contents for UTV800

Reviews:

Related manuals for UTV800

Brands by name

Popular brands