Stels UTV800 Owner'S Manual Download Page 69

Page: 69 / 139

- 66 -

Front and rear brakes

Brake fluid leakage

Check to see if any brake fluid is

leaking out of the pipe joints or the

brake fluid reservoir. Apply the brakes

firmly for one minute. If there is any

leakage, have the vehicle inspected

by an dealer.

Brake operation

Test the brakes at slow speed after

starting out to make sure they are

working properly. If the brakes do not

provide proper braking performance,

inspect the brake system.

! WARNING

Driving with improperly operating

brakes.

POTENTLAL HAZARD

You could lose braking ability, which

could lead to an accident.

WHAT CAN HAPPEN

Always check the brakes at the start

of every ride. Do not operate the

vehicle if you find any problem with

the brakes.

HOW TO AVOID THE HAZARD

If a problem cannot be corrected by

the adjustment procedures provided

in this manual, have the vehicle

inspected by an dealer.

Summary of Contents for UTV800












































































































































Search results

Summary of Contents for UTV800

Reviews:

Related manuals for UTV800

Brands by name

Popular brands

Stels UTV800, Owner'S Manual

Search results

Summary of Contents for UTV800

Reviews:

Related manuals for UTV800

Brands by name

Popular brands