Stels UTV800, Owner'S Manual, Page: 65 / 139

- 87 -
Break-in
The first month is most important in the
life of your vehicle. Proper operation
during this break-in period will help
assure maximum life and performance
from your new vehicle. The following
guidelines explain proper break-in
procedures.
1
、
After the engine starts, the engine is
not allowed in high speed in the
neutral gearshift.
2
、
Drive vehicle from stop to low speed
slowly.
3
、
Avoid braking strongly.
4
、
Do not exceed the vehicle speed on
the below schedule.
Starting and Operating Instructions
●
Before starting the engine, be sure
that the driver is seated properly in the
UTV800 and tighten the seat belts.
●
Testing the UTV800 in an open place
at the beginning to learn how to start,
turn and stop.
●
Operate the UTV800 slowly until you
are familiar with it.
●
The turning radius of this UTV800 is
small and agile, so the centrifugal force
is very high when turning at high speed.
Slow down to a more controllable
speed when turning to prevent the
UTV800 from rolling over.
●
To prevent vehicle from rolling over,
be sure to only turn the vehicle at a
slow more controllable speed.