background image

Page 22 | Stellar

®

 108-12-20/36 Shuttle Owner’s Manual

WARNING

25627 - Rev B

Moving parts can crush

and cut.
Keep hands and arms 

clear when operating 

equipment.

Crush Hazard

DANGER

Electrocution Hazard

Death or serious injury will result from 

inadequate clearance if hooklift, load, 

or vehicle becomes electrically 

charged.
• Maintain safe clearance from high

  voltage power sources.
• Never approach vehicle or load if

  equipment is near a high voltage 

  power source.

55832 - Rev A

WARNING

Read and understand all

manuals and safety signs 

before operating or servicing 

this equipment.

Failure to follow operating, 

maintenance, or safety 

instructions can result in 

death or serious injury.

Untrained Operator Hazard

68024

26134 - Rev A

Operating hooklift when dump 

tabs are not properly fastened 

can result in death or serious 

injury.

• Inspect tabs daily.
• Immediately replace 

  damaged tabs.

Misuse Hazard

WARNING

26134 - Rev A

Operating hooklift when dump 

tabs are not properly fastened 

can result in death or serious 

injury.

• Inspect tabs daily.
• Immediately replace 

  damaged tabs.

Misuse Hazard

WARNING

PN D0779

01

4214

1

DECAL CONTACT STELLAR

04

35234

1

DECAL STELLAR MADE IN THE USA

03

26134

2

DECAL WARNING MISUSE TABS

02

25627

2

DECAL WARNING CRUSH

05

52681

2

DECAL STELLAR LOGO 6.00X16.50

06

55832

2

DECAL DANGER ELECTROCUTION HOOK

07

68024

1

DECAL WARNING UNTRAINED OPERATOR

ITEM PART No.

QTY.

DESCRIPTION

Rev Level: O

Date: 08/16/21

Changes: Separate chassis decals from

                  hooklift assembly decals.

Last Revision

05

07

02

06

03

FOR SERVICE ON THIS EQUIPMENT

CONTACT:

STELLAR INDUSTRIES, INC.

190 STATE STREET, GARNER, IA 50438

641-923-3741

800-321-3741

4214

35234

Proudly Designed

and Manufactured

in the USA by

DANGER

Electrocution Hazard

Death or serious injury will result from 

inadequate clearance if hooklift, load, 

or vehicle becomes electrically 

charged.
• Maintain safe clearance from high 

  voltage power sources.
• Never approach vehicle or load if

  equipment is near a high voltage 

  power source.

55832 - Rev A

MODEL NO.

SERIAL NO.

DATE

MADE IN THE U.S.A.  BY STELLAR INDUSTRIES, INC.

PN C5942

®

PATENT INFORMATION

http://www.stellarindustries.com/ip

WARNING

25627 - Rev B

Moving parts can crush

and cut.
Keep hands and arms 

clear when operating 

equipment.

Crush Hazard

26134 - Rev A

Operating hooklift when dump 

tabs are not properly fastened 

can result in death or serious 

injury.

• Inspect tabs daily.
• Immediately replace 

  damaged tabs.

Misuse Hazard

WARNING

26134 - Rev A

Operating hooklift when dump 

tabs are not properly fastened 

can result in death or serious 

injury.

• Inspect tabs daily.
• Immediately replace 

  damaged tabs.

Misuse Hazard

WARNING

SERIAL PLATE (C5942)

NOT INCLUDED

WITH DECAL KIT  

05

06

01

04

02

03

Step 14A: Apply Hooklift Assembly Decals

Summary of Contents for 108-11-20













































Reviews: