INS_CXL58-AF Rev D
Page 12
▲
▼
◄
◄
▲
▲
▲
10”H x 10”W
(254mm x 254mm)
Opening required for horizontal terminations
36-1/2”
(927mm)
61-1/4”
(1,556mm)
▼
▲
For clearance of front to floor or hearth extension:
Eminence and Inspiration = 2-1/4” (57mm)
Accent = 3/4” (19mm)
Clean Trim = NA (Inside fit)
16-1/2”
(419mm)
NOTE: Interior framing shown. Add sheetrock thickness to framing depth for exterior walls.
B. MINIMUM FINISHED OPENING DIMENSIONS
A. WALL ENCLOSURE ROUGH OPENING
5 - FRAMING
Figure 5B
CLEAN TRIM FRONT:
$'j:
ACCENT FRONT:
)
MUST BE RAISED 3/4" (19mm) OVER THE FINISHED HEIGHT
h
EMINENCE AND INSPIRATION FRONTS:
)
MUST BE RAISED 2-1/4" (57mm) OVER THE FINISHED HEIGHT
h
NOTE: [+! !0"$
0"
NOTE: ` 0"{!
adjust rough opening size as necessary to maintain at least minimum clearance requirements.
WARNING: @ "!
full door faces, access components, installation of gas line, fan, etc.
WARNING: Do not obstruct the screen front. Room air enters through lower passage, is heated and exits through upper pas-
sage. Blocking these passages may result is overheating, creating a potentially hazardous situation.
f i r e - p a r t s . c o m
