- 7 -
How it Works / Basic Function
The Control Pro DT Quattro and
Ultrasonic presence detector
product familiy is intended to
control lighting and HVAC in
commercial buildings, schools,
public building, etc.
Lighting is controlled in relation
to both the presence of motion
and ambient light levels. The HVAC
output on the (COM2-24) is
signaled in relation to only the
presence of motion.
Commissioning adjustments
are made by potentiometer or dip
switch settings on the sensor or by
the optional (RC3 service remote)
commissioning tool.
US Quattro COM1-24
DT Quattro COM1-24
US Oneway COM1-24
US Hallway COM1-24
1 switching output (COM1-24 Low
Voltage) operating in relation to
the detection of motion and
ambient light level.
Settings:
- Light level setting
- Occupancy time delay,
Pulse mode, IQ mode
US Quattro COM2-24
DT Quattro COM2-24
US Oneway COM2-24
US Hallway COM2-24
1 low voltage switching output
operating in relation to the
detection of motion and ambient
light level. An additional isolated
normally open and normally
closed set of dry contact closures
for signaling HVAC (heating/venti-
lation/airconditioning) in relation
only to the presence of persons.
Settings:
- Light level setting
- Occupancy time delay,
Pulse mode, IQ mode
- HVAC stay-'ON' time
- HVAC switch-'ON' delay,
Auto-HVAC mode
US Quattro DIM-24
DT Quattro DIM-24
US Oneway DIM-24
US Hallway DIM-24
1 low voltage switching output
operating in relation to the
detection of motion and ambient
light level. An additional isolated
1-10 volt dimming output operat-
ing in relation to the amount of
daylight present.
Settings:
- Light level setting
- Occupancy time delay, IQ mode
- Stay 'ON' time DIM before 'OFF'
- Constant light level DIM
control option
EN
