- 16 -
DIP 4
In the 'ON'-'OFF' setting, the light
can be switched 'ON' and 'OFF'
manually at any time (except in
pulse mode: no manual 'OFF').
In the 'ON' setting, light can not
be switched 'OFF' manually.
The stay-'ON' time starts from the
beginning again each time the
button is pressed.
'ON' only / 'ON'&'OFF' manual switching
DIP 1
Sensor DIP Switch Settings
Test mode has priority over all
other settings on the presence
detector and serves the purpose
of checking for proper working
order as well for testing the
detection zone. Irrespective
of ambient light level, the pres-
ence detector activates the light
to stay 'ON' for approx. 8 sec. in
response to movement in the
room (blue LED flashes when
movement is detected). All user-
selected potentiometer settings
apply in normal mode. The pres-
ence detector can also be set by
means of the blue LED without
any load connected.
Normal mode / Test mode (NORM / TEST)
DIP 2
The light automatically switches
'ON' and 'OFF' in relation to
occupancy and daylight contribu-
tion. Light can be switched 'ON'
and 'OFF' manually at any time.
When switched 'OFF' manually
this temporarily interrupts the
automatic 'ON' function as long
as the room is occupied. Once
the room is no longer occupied
and the time delay of the sensor
has elapsed the sensor will return
to the automatic 'ON' function.
Manual ON mode (MAN) / Automatic mode (AUTO)
Automatic mode: (AUTO)
Manual ON mode: (MAN)
The load will only switch 'OFF' au-
tomatically. Light is switched 'ON'
manually by the occupant and
stays 'ON' for the time
setting of the sensor.
DIP 3
Tells the sensor how to interpret
the incoming maintained or
momentary switching signal.
Assigning external (momentary)
buttons / (maintained) switches
allows you to operate the detector
as a manual on unit or override it
manually at any time. When using
the DIM-24 power module and a
momentary switch, light can be
dimmed manually by pressing and
holding the momentary switch
until the desired light level is
achieved. Maximum wire lenght
between sensor and switch
<50 m / 164 ft.
Momentary / Maintained switch option
COM1-24 / COM2-24 / DIM-24
DIP 5
Provides constant light level.
Detector measures the level of
daylight and activates sufficient
artificial light to achieve the
required level of light intensity.
As daylight changes, the electric
light is adjusted accordingly.
In addition to the daylight
component, electric light is also
switched 'ON' and 'OFF' in relation
to whether or not persons are
present.
Constant light level DIM control option
DIM-24
d
