- 18 -
Technical Specifications
Remote Control
Using the PC 7 user remote
control (optional), functions can
be conveniently activated from
the floor.
Service remote control
RC 6 (optional) permits
convenient configuration
(see Accessories on p. 15)
KNX mains connection:
24 V via KNX bus voltage
Settings:
by means of ETS software, remote control or bus
Lighting channels:
Light 1 – Light 4
Switching/dimming;
switching mode - constant-lighting control
Stay-'ON' time:
IQ mode, 1 – 30 min.,
depending on presence and light level
Light measurement:
Mixed light
Basic brightness :
OFF/ 10% – 50%
Stay-'ON' time:
Basic brightness 'ON' duration, 1 – 30 min.
HVAC output:
depending on presence
Switch-on delay:
Room surveillance, 1 – 30 min.
Stay-'ON' time:
1 – 120 min.
Presence stay-'ON' time output: 1 – 255 sec.
Further outputs:
Light level, scenario-controlled
Square detection zones:
Presence:
Radially:
Tangentially:
IR Quattro KNX
no more than 4 x 4 m (16 sqm)
no more than 5 x 5 m (25 sqm)
no more than 7 x 7 m (49 sqm)
IR Quattro HD KNX
no more than 8 x 8 m (64 sqm)
no more than 8 x 8 m (64 sqm)
no more than 20 x 20 m (400
sqm)
Angle of coverage:
HF 360 KNX
360° with 140° aperture angle
also through glass, wood and
stud walls. 1 or 2
detection directions can be
masked out for adjustment to
the room situation.
DUAL HF KNX
refer to diagram on p. 17
also through glass, wood
and stud walls.
Reach:
HF 360 KNX
at most 8 m all-round,
at least 1/3, 2/3,
max. electronically
selectable setting
(ETS software, KNX bus,
remote control RC 6)
DUAL HF KNX
min., 1/3, 2/3, max.
electronically selectable
setting in either direction
(ETS software, KNX bus,
remote control RC 6)
