Software
UR44C Operation Manual
14
6
Phase
Switches phase inversion on (lit) and off (unlit). Shows L, R
when stereo is selected.
Effect Settings area
This area is used to set parameters related to the UR44C
input/output port effects.
1
Pre/Post
Used to select the insertion point for the effect.
2
Effect Name
Displays the names of the applied effects.
3
Effect Bypass
Enables/bypasses the effect.
4
Effect Edit
Displays the Effect Edit window.
5
Effect Type
Selects the effect type.
Settings:
No Effect, Morphing Ch Strip ([m] or [s]), GA Classics -
CLEAN, GA Classics - CRUNCH, GA Classics - LEAD,
GA Classics - DRIVE
NOTE
The maximum number of Channel Strip and Guitar Amp Classics
iterations which can be used simultaneously is limited. Refer to
the “Limitations on the use of effects” (
6
REV-X Send
Adjusts the signal level which is sent to REV-X.
Range:
-∞ dB – +6.00 dB
7
REV-X Name
Displays the selected REV-X type.
8
REV-X Edit
Opens the “REV-X” (
) setup window.
9
REV-X Type
Selects the REV-X type.
Settings:
Hall, Room, Plate
Outputs area
This area is used to set parameters related to hardware
outputs.
1
Mix Bus name
Displays the Mix Bus name of the hardware output. The
output bus of the track must be connected to this Mix bus.
2
Output meter
Displays meters for the hardware Mix Bus connected to
hardware outputs.
3
Meter Clip
Displays the input meter clip when clipping occurs. Click
this to stop this display.
4
Headphones
Patches headphones to the hardware Mix Bus connected
to hardware outputs.
1
2
3
7
8
5
9
6
4
1
4
3
2
