Operation
43
EN
Displaying the temperature sensor
The heating pump is equipped with four temperature sensors. The temperature sensors continuously
check the temperature of the water, the ambient temperature, the compressor and the lamella heat ex-
changer.
It is possible to display the temperature of each of the temperature sensors individually.
When you display the sensor temperature, the number on the left of the display denotes the individual
temperature sensor. On the right of the display, the recorded temperature of the sensor is read off.
Identification numbers for the temperature
sensors:
•
14
: Swimming pool temperature sensor
•
15
: Ambient temperature sensor
•
16
: Compressor temperature sensor
•
17
: Condenser temperature sensor
•
18
: unused temperature sensor
1. Ensure that the heating pump has started
(see “Starting the heating pump”).
2. Press the
12
key for three seconds to
display the sensor temperature.
The sensor temperature will be displayed
for approx. 10 seconds.
3. Press the
key once again to display to
the next sensor temperature.
The sensor temperature will be displayed
for approx. 10 seconds.
4. Press the
17
key or no key to go navi-
gate back to the home screen.
17
12
