Operation
39
EN
Operating the display
Standby mode
When the heating pump is switched on, the dis-
play
1
is in Standby mode.
In Standby mode, water is neither heated or
cooled. The display shows the current water
temperature
11
.
11
1
Starting the heating pump
1. Ensure that the heating pump is switch on
(see “Switching on theheating pump”).
2. Lift up the display protective
1
flap.
3. Press the
17
key, to start the heating
pump.
The heating pump starts within the next
three minutes.
Above the heating pump display, the following
information is preserved:
• Set operating mode
10
• Set water temperature
18
• Current water temperature
11
11
10
18
1
17
Choosing the operating mode
You can choose between the two operating
modes: heating
10
and cooling
.
As soon as you change the operating mode,
the set temperature
18
resets to the default
value.
Default heating
: 40 °C
Default cooling
: 30 °C
To change the operating mode, execute the
following steps:
1. Start the heating pump (see the chapter
“Starting the heating pump”).
2. Press the
16
key to choose the
operating mode.
3. Select the desired temperature (see the
chapter “Setting the temperature”).
10
18
16
