STEIN300 SoftMove_Stop Devices_08_GB.doc / 10.2018
63
13
Cleaning and maintenance
13.1
Cleaning
Depending on the ambient conditions of the transport system, the stop device gets dirty
Clean the stop device regularly!
How frequently this must be done depends on how dirty it gets.
i
Cleaning does not mean the transport system needs to be dismantled.
DANGER!
From unexpected start-up of the Transport System.
DANGER!
HIGH ELECTRICAL VOLTAGE
Electric shock hazard
1
Disconnect the Workpiece Transport System in question from the electrical power
supply before carrying out any cleaning work!
2
Put up warning signs to prevent the system being started up while installation and
repair work is being done.
3
Remove the pallets from the Transport System.
Protective clothing must be worn
When cleaning, wear goggles, safety gloves and a dust-mask, if necessary.
Only use a vacuum cleaner to remove dust, shavings and other particles.
4
Remove dust, shavings and other particles with a vacuum cleaner.
5
Clean dirty surfaces with a soft, lint free cloth, lightly dampened with cleaning flu-
id.
WARNING
When cleaning, do not use any abrasive, corrosive or scouring cleaning fluids or cleaning
materials.
Avoid fluid getting into the components of the system or of the processing stations.
i
STEIN Automation recommends the industrial cleaner by Würth,
Article no.: 893140 or Arecal Clean manufactured by RECA Norm,
article no.: 0895014500.
Keep the upper belt surface in good condition by regularly applying Carbaflo
®
XTR5 F.
See brief instructions for the conditioning fluid Carbaflo
®
XTR5 F.
Environmental protection.
Dispose of waste material and used cleaning cloths in an environmentally responsible
way.
