12
STEIN300 SoftMove_Stop Devices_08_GB.doc / 10.2018
4
Technical description
4.1
Contents
The stop devices must be installed by the customer or are delivered fully installed and
ready to connect.
WARNING!
The stop devices are supplied without protective covers.
These must be adapted
by the customer to the specific requirements and installed.
WARNING
The scope of delivery for the stop devices does not include a controller! This must be
ordered separately.
The stop devices are fitted with ASI electronics and controlled via the ASI bus.
4.2
System components
Fig. 4-1:
Stop devices
1
Belt element
2
Pallet
3
Stop device
The simplest type of these devices is a stop device, which stops the pallet (WT) in a de-
fined position at a workstation.
Application:
At manual workstations, e.g. to place or install parts.
Pallet position:
Pallet precision in the belt /- 1 mm in the Y axis.
By stopping off-centre the pallet can skew the pallet.
The position of the pallet can change by 0.5 mm in the Z axis.
i
The pallet can be moved against the direction travel from the stop device (X axis).
1
2
3
