STEIN300 SoftMove_Stop Devices_08_GB.doc / 10.2018
13
Fig. 4-2:
Stop devices and
centring rails
1
Belt element
2
Pallet
3
Stop device
4
Centring rails
For workstations, which require a more exact positioning of the pallet in the X and Y axis,
the use of a stop device with two centring rails will serve the purpose. The centring rails
are screwed on internally on both sides on the belt profile.
Function:
To stop the pallet with centring in the centring rail.
Application:
For manual and automatic workstations where a more precise position of the pallet is re-
quired.
Pallet position:
Pallet precision in the X axis +/- 0.25 mm and Y axis +/- 0.15 mm.
The position of the pallet can change by up to 0.5 mm in the Z axis.
i
The pallet can be moved against the direction of travel from the stop device (X axis).
1
4
2
3
4
