Steelwrist Tiltrotator Front pin lock X04, User Manual

Page: 43 / 64

To change the profile, select Change Profile as follows:
1. Use the drop down menu to select Change Profile
2. A button for each profile is shown with the current profile indicated by green edges.
3. Select the profile you want to activate.
4. Press the OK button on the right of the navigation bar to save the settings and the system goes back to the Main
menu. If you do not want to save settings press Cancel on the left side of the navigation bar.
To rename a profile, select Rename Profile - Change Profile Name as follows:
1. Use the drop down menu to select Change Name.
2. A button for each profile is shown with the current profile indicated by green edges.
3. Select the profile you want to rename.
4. Enter the new name using the touch screen keyboard.
5. Press the OK button on the right of the navigation bar to save the settings and the system goes back to the Main
menu. If you do not want to save settings press Cancel on the left side of the navigation bar.
To copy a profile to another, select Copy Profile as below:
1. Use the drop down menu to select Copy Profile.
2. Use the drop down menu to choose which profile you want to copy from.
3. Use the drop down menu to choose which profile you want to copy to.
4. Press the OK button on the right of the navigation bar to save the settings and the system goes back to the Main
menu. If you do not want to save settings press Cancel on the left side of the navigation bar.
User Manual tiltrotator with Front pin lock
™
| 6. User interface | 43