ARC Runner
ARC Runner Operator’s Manual
9
23. Never
work
on
curves
with
convex
or concave radius less than 1500 mm (5 ft).
24. At heights, use a fall arrester to protect the carriage from falling.
25. Always use eye protection
(helmet, shield, and screen),
hearing protection, gloves,
and protective clothing during work. Do not wear loose clothing.
26. Before every use, inspect the carriage to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect the operation of the carriage.
27. Never try to manually stop the travel
. To stop, set the travel direction switch to ‘O’.
28. Maintain only when the carriage is unplugged from the power source.
29. Repair only in a service center appointed by the seller.
30. If the carriage falls from any height, is wet, or has any other damage that could
affect the technical state of the carriage, stop the work and promptly send the
carriage to the service center for inspection and repair.
31. Never leave the carriage unattended during work.
32. Remove
from
the
worksite
and
store
in
a secure
and
dry place when not in use.
Summary of Contents for ARC Runner
