Page 10 of 20
005720D Rev F
®
a
b
c
Locate back left of treadmill and plug in signal cable as indicated
(a). Locate back center of console and plug in other end of
signal cable as indicated (b). Plug the cord of the table and the
treadmill into an outlet. Make sure treadmill is turned on (c).
NOTE
for (a) & (b):
Be sure to secure signal cable to the console
and treadmill with the screws integral to the cable connector.
This will ensure a good connection.
REAR OF
TREADMILL
19
SIGNAL CABLE
CONSOLE
View from Underneath
Worksurface
SIGNAL CABLE
CONSOLE
