Page 19 of 20
005720D Rev F
®
Guidelines on Moving the Table
When possible, the tables should be moved in a horizontal (flat) position.
If the table must be moved vertically (i.e. standing on a pallet), care must be taken to ensure no side pressure
is placed on any of the legs as it is tipped into position, during transport, and when tipped off the pallet at the
new location.
Before in use in the location, the table must again be completely leveled side-to-side and front-to-back. Failure
to do so may cause binding of the leg(s) and failure to operate properly.
After moving, the legs must be re-synchronized by holding 'down' arrow on the controller while
the legs seek to level themselves.
1
2
3
4
STRETCHER
FOOT
GLIDES
ATTACHMENT
PLATE
CONTROL BOX
CONTROL
RIGHT LIFT
COLUMN
LEFT LIFT
COLUMN
