Page 2 of 18
939501051 Rev G
TABLE OF CONTENTS
• Panel Worksurface with Hanging Pedestal----------------- 3-9
• Panel Worksurface with Down-to-Floor Pedestal--------- 10-12
• Installing a Curved Worksurface------------------------------ 13
• Installing a Curved Corner Worksurface-------------------- 14
• Pedestal Glide Adjustment------------------------------------- 15-16
• Suspended Pedestal Worksurface Mounted---------------17-20
Items listed below are for identification purposes only and your assembly
package will contain only the necessary items for your model installation.
ITEM NO.
DESCRIPTION
PACKAGE CONTENTS
ITEM NO.
DESCRIPTION
1 Floor Support Assembly
2 Cantilevered End Support Assembly
3 Front Side Support Assembly
4 Rear Side Support Assembly
5 Center Support Assembly
(Used With Worksurfaces 72-9/32 Wide)
6 Worksurface Assembly
7 Screw #12 x 7/8"
8 Front And Rear Mounting Bracket
(For 29" Deep Pedestals)
9 Clear Access End Panel
10 Rear Mounting Bracket
(For 19" Deep Pedestals)
11 Screw #10 x 3/8"
12 Hold Down Plate
13 End Filler
14 19" Deep Pedestal
15 29" Deep Pedestal
16 Machine Washer Hex Head Screw #18 x 5/16"
17 Curved Worksurface
18 Attaching Plates (For Curved Worksurfaces)
19 Screw #10 x 1"
20 Apron Rear (24")
21 Apron Rear (30")
22 Screw #10 x 1/2"
23 (Reference only - Bracket)
24 Apron Front LH.
25 Apron Front RH.
26 Reinforcing Bars
27 Hex Head Screw (With Hole Thru Side)
28 Down To Floor Pedestal (24" and 30" Deep)
29 Cable
30 Washers
