SteelBeast PRO 2 PB Series Operator'S Manual Download Page 29

Page: 29 / 29

PB2

This document is protected by copyrights.

Copying, using, or distributing without permission of JEI Group Ltd is prohibited.

6. WARRANTY CARD

WARRANTY CARD No

.............

..................................................................... in the name of Manufacturer warrants the

PRO 2 PB Pipe Bevelling Machine to be free of defects in material and workmanship

under normal use for a period of 12 months from the date of sale.

This warranty does not cover tool bits as well as damage or wear that arise

from misuse, accident, tempering, or any other causes not related to defects in

workmanship or material.

Date of production .........................................................................................................

Serial number ................................................................................................................

Date of sale ...................................................................................................................

Signature of seller ..........................................................................................................

1.06 / 1 March 2019

WE RESERVE THE RIGHT TO MAKE CHANGES IN THIS MANUAL WITHOUT NOTICE

Summary of Contents for PRO 2 PB Series






























Search results

Summary of Contents for PRO 2 PB Series

Reviews:

Related manuals for PRO 2 PB Series

Brands by name

Popular brands

SteelBeast PRO 2 PB Series, Operator'S Manual

Search results

Summary of Contents for PRO 2 PB Series

Reviews:

Related manuals for PRO 2 PB Series

Brands by name

Popular brands