Steel City 65105, User Manual

Page: 17 / 24

17
WARNING
DO NOT operate this unit without the filters in place.
NOTE: The Air Cleaner may produce a slight odor for
the first couple hours of operation due to the protective
coating which is applied to internal components. This
odor will dissipate and should be disregarded.
1. When the “TIME” button (B) on the remote control
is pressed, the blower will run for 1/2 hour. An LED
light will show up on the sensor panel.
2. Pressing the “TIME” button again will set the blower
to run for one hour. Notice that the light on the
sensor panel has now moved to the one hour
location.
3. When the “TIME” button is pressed a third time, the
blower will run for two hours. At this point, the green
light will show up under the two hour location.
4. When you press the “TIME” button the fourth time,
the blower will run for four hours. Notice that the
indicator light glows at the four hour location.
5. All of these functions can be manually controlled by
using the two buttons on the sensor panel.
This air cleaner has a timer that can be set by remote
control.
WARNING
DO NOT USE THIS UNIT TO FILTER METAL DUST.
Combining wood and metal dust can create an explo-
sion or fire hazard. This Air Cleaner is intended for use
where only dry airborne dust is present. Its use should
be limited to non-explosive, non-metallic atmospheres.
WARNING
NEVER SECURE MOUNTING HARDWARE TO
DRYWALL, DROP CEILING TILE/FRAME OR NON-
STRUCTURAL MEMBERS.
WARNING
KEEP A MINIMUM OF SEVEN FEET BETWEEN
BOTTOM OF AIR CLEANER AND THE FLOOR.