Steel City 65105, User Manual

Page: 10 / 24

10
5. ALWAYS keep the work area clean, well lit, and
organized. DO NOT work in an area that has slip-
pery floor surfaces from debris, grease, and wax.
6. ALWAYS unplug the machine from the electrical
receptacle when making adjustments, changing
parts or performing any maintenance.
7. DO NOT leave the air cleaner plugged into the
electrical outlet. Unplug air cleaner from the outlet
when not in use and before servicing, changing
filters, unclogging and cleaning.
8. DO NOT use this unit to filter metal dust. Combin-
ing wood and metal dust can create an explosion or
fire hazard. This air cleaner is intended for use
where only dry airborne dust is present. Its use
should be limited to non-explosive, non-metallic
atmospheres.
9. DO NOT use this machine to dissipate fumes or
smoke; fire or explosions can result.
4. ALWAYS wear a NIOSH/OSHA approved dust
mask to prevent inhaling dangerous dust or air-
borne particles.
14. KEEP all fingers, arms, and hands away from
the fan. Avoid all exposure to rotating parts to
prevent injury.
15. DO NOT handle the plug or air cleaner with wet
hands.
16. DO NOT pull the air cleaner by the power cord.
NEVER allow the power cord to come in contact
with sharp edges, hot surfaces, oil or grease.
10. SECURELY anchor this unit into a supporting struc-
ture when suspending it from the ceiling. Always
keep a minimum of 7 feet between the bottom of
the unit and the floor surface to allow for sufficient
head clearance. Use only a chain rated for a mini-
mum of 150 lb. working load to adequately hold the
unit. Use steel S-hooks that are at least 1/4” in
diameter to suspend the unit from the ceiling. Lag-
type bolts used to suspend the unit from the ceiling
must be threaded at least 1-1/2” into the supporting
structural members.
11. SUPPORT this unit or securely clamp it to the work
surface when it is used in a portable application to
eliminate potential movement and/or damage from
falling.
12. DO NOT operate this unit without the filters in
place.
13. MAKE CERTAIN that the intake and exhaust areas
are clean prior to starting the unit. A clogged intake
or exhaust can cause a fire and/or explosion.
3. ALWAYS wear hearing protection. Plain cotton is
not an acceptable protective device. Hearing
equipment should comply with ANSI S3.19
Standards.
WARNING
WARNING
WARNING
WARNING