13
MAKE CERTAIN THAT THE SAW IS DISCONNECT-
ED FROM THE POWER SOURCE.
WARNING
!
MOUNTING THE TABLE
1.
2.
3.
4.
Raise the guard all the way to the highest position
and leave the blade under tension.
FIG.3 (A)
shown
in shipping position.
With the bolts hanging free
(FIG.4 (B))
, guide the
blade through the slot in the table
(FIG.5 (C))
and turn
the table to guide the bolts into the openings in the
trunnion bracket
(FIG.6 (D))
.
With bolts in place
,
turn knob
(E)
clockwise to tighten
and repeat for the other side.
SEE FIG.7
.
Install the red insert into the opening
(F)
with detent
in the slot. Please take note that the insert can go in
upside down from reverse, this is your choice.
SEE
FIG.8
.
FIG.8
FIG.7
FIG.6
FIG.5
C
D
F
E
FIG.4
FIG.3
A
B