EN
36
763.134 Z02 1913 coolcept_fleX
6.4
Opening the AC plug
1. Open the rear cable gland.
2. Simultaneously press in the locking hooks on the left and on the right of the plug hous-
ing with a suitable tool.
3. Remove the upper part of the housing form the contacting part.
6.5
Removing inverter from mounting
plate
1. Press locking plate (3) towards the wall and hold it
there.
2. Push inverter upwards until the detent (2) can no
longer snap in.
3. Release the locking plate.
4. Hold inverter by the edge (1) with both hands and lift it
off upwards. The locating pins (4) must separate from
the retaining tabs of the mounting plate.
5. Remove inverter from mounting plate.
6. Unscrew the fastening screws of the mounting plate.
7. Remove mounting plate.
