EN
32
763.134 Z02 1913 coolcept_fleX
5.2
Setting the date and time
1. Select and confirm the desired date format.
2. Set and confirm date/time. The inverter will automatically
correct any invalid input.
5.3
Setting the country
With this menu item, you will set the country of use. Depending on the selection, the in-
verter will load the grid parameters specified for the country (refer to "Table of countries" in
https://www.steca.com/index.php?coolcept-fleX-1-MPPT-en
and
https://www.steca.com/index.php?coolcept-fleX-2-MPPT-en
The country can only be set once. In case of an incorrect input or change of country:
1. Please, contact Steca (ask for password).
2. In the "Del. country settin" menu, delete the set country (password-protected setting).
3. Perform the initial commissioning again.
If the respective country is not present in the country selection, select a country with stricter
specifications.
The selection of a country has no impact on the display language.
1. Select and confirm the country.
2. If a correction is required, return to the country selection
mask by pressing "ESC".
3. If the input is correct, confirm the set country (press "SET"
longer).
