english
29
29
4.4. Limits regarding the size of the workpiece.
This machine is for metal cutting only; when turning it ON you will
be able to proceed to cut the material you want.
Before starting, make sure to read, understand and apply the
safety instructions and other instructions contained in the
present material.
Below you will find a series of general indications that will
allow you initiating yourself in the world of welding and working
efficiently.
THICKNESS OF PIECE
KIND OF SERVICE
SEPARATION
CUT
MEDIUM
HEAVY
INDUSTRIAL
8 mm
6 mm
P35.25C
PLASMA25GE
P60.40B
PLASMA40GE
P60.40B
PLASMA40GE
15 mm
10 mm
P60.40B
PLASMA40GE
P60.80
PLASMA80TGE
P60.80
PLASMA80TGE
33 mm
30 mm
P60.80
PLASMA80TGE
P60.120
PLASMA120TGE
P60.120
PLASMA120TGE
38 mm
35 mm
P60.120
PLASMA120TGE
P60.120
PLASMA120TGE
P60.120
PLASMA120TGE
5. SERVICING AND MAINTENANCE
INSTRUCTIONS
5.1. Cleaning, maintenance, lubrication, sharpening.
For cleaning, always disconnect the equipment and wait at
least 10 minutes for the sake of safety regarding the discharge
of the power capacitors. Clean the housing using a slightly wet
cloth. Depending on the pollution of the work environment or at
least each 1000 hours, clean the inside with dry pressurized air,
removing the upper housing and removing dust, metal pollutants
and fluff, paying special attention to the dissipators and the fan.
The equipment does not need any special maintenance by the
user, whereby careful use within the environmental limits is the
best guarantee for long years of safe service.
It is recommended to send the equipment to the technical
services after each 3000 work hours or every 3 years for
verification and recalibration.
5.2 Repair service
The technical service will advise you on questions you might
have regarding the repair and maintenance of your product, as
well as on spare parts.
You may obtain exploded drawings and information on spare
parts on the internet under:
Our team of technical advisors will be happy to guide you
regarding the acquisition, application and setting of products and
accessories.
5.3 Guarantee
Guarantee card
Among the documents that are part of the electric tool, you will
find the guarantee card. You will have to fill in the guarantee
card completely, apply a copy of the sales slip or invoice thereto,
and give it to your retailer in exchange for the corresponding
acknowledgement of receipt.
REMARK:
If this card were missing, immediately ask you retailer
for it.
The guarantee is limited to manufacturing or machining failures
only, and ceases when the parts have been disassembled,
manipulated or repaired out of works.
5.4 Disposal
We recommend subjecting all electric tools, accessories and
packaging to recycling respecting the environment.
For EU countries only:
Do not throw electric tools to the garbage! According
to European Directive 2002/96/EC on electric and
electronic devices, after transposition thereof into
national law, electric tools must be collected
separately so as to be subjected to ecologic
recycling.
Right to changes reserved.
6. Regulations
6.1 Technical features
= tension input.
A
= current input.
-
ON
OFF
%
EN60974
= work cycle.
= cutting capacity.
= weight.
= generator power.
6.2 Declaration of conformity.
We declare under our exclusive responsibility, that the
machines: POWER SOURCES FOR WELDING, models: satisfy
all essential safety and health requirements in conformity with
regulations UNE EN60974-1:2013, UNE EN 60974-10:2008
CORR 1:2010, 2004/108/EC, 2006/95/EC, 2002/96/CE and
2003/11/EC, in conformity with WEEE / RoHS.
Ramiro de la Fuente
Director Manager
March 3, 2014
