Walter Stauffenberg
GmbH & Co. KG
Im Ehrenfeld 4
D-58791 Werdohl
Phone +49 (0) 2392 916-0
Operating instructions PT-RF
V1.3
page 13 of 30
5.3 Continuous measurement
To carry out a continuous measurement, hold the reading device in front of
the pressure transmitter as for an individual measurement.
Press and hold the
key to carry out a continuous measurement.
During the measurement, the continuous measurement symbol
will
appear in the upper right corner and the number of measurements will be
shown below the pressure value
.
Measurement results are stored in the memory with a resolution between
250 ms and 400 ms. The resolution depends on the orientation of the
antenna towards the pressure transmitter and on the ambient conditions of
the measurement.
Display during continuous measurement
Serial number
Measurement range end value
Type of measurement
Current pressure value
Number of measured values
Sequential number/ID
Current temperature value
