Walter Stauffenberg
GmbH & Co. KG
Im Ehrenfeld 4
D-58791 Werdohl
Phone +49 (0) 2392 916-0
Operating instructions PT-RF
V1.3
page 21 of 30
Date:
Date of measurement
Time:
Time of measurement
Pressure Act.*:
Pressure value (only for single or continuous)
(When a continuous type of measurement is taken,
the Result Cont. will show the average of all
continuous readings)
Temp*:
Temperature value.
ID:
Measurement ID which is assigned and shown
during taking the measurement.
Type of measurement: This shows the type of measurement that has been
used. If the measurement was a single
measurement it is shown “Single”. If the
measurement was a continuous measurement it is
shown “Continuous” and the result of measurement
type is shown as “Result continuous”.
Seq. No.:
In the case of a continuous measurement, this
number is used as an indicator of the number of
measurement. During a single measurement, this
value remains at 1.
Pressure min.
*
:
Minimal pressure value when doing a continuous
measurement.
Pressure max.*:
Maximal pressure value when doing a continuous
measurement
Nominal pressure:
Configurable Nominal pressure
Tol%:
Configurable positive tolerance of the measuring
point
