Staufenbiel Yak 11, Instruction Manual

Page: 14 / 32

14
EN
Congratulation on your purchase of the Yakovlev Yak-11 from Staufenbiel . This represents a faithful
reproduction of the two-seater Soviet training aircraft in foamed design. The model can be completed
in just a few work steps thanks to its high level of prefabrication.
Besides the motor (5052-410KV), the scope of supply includes an 80A-BEC controller made by
Hobbywing as well as 6 servos plus electric retractable landing gear - please do not on any account
attempt to extend this by hand using force; this is only possible via the remote control!
PREFACE
The construction of the model and the detailed solutions related subject to a certain taste dependency.
Therefore, the solutions to these instructions are to be understood as a suggestion. There are certainly other
options and approaches. In some alternatives is therefore received during the building specifications, but
does not shown on the pictures.
THE WINGS
To begin with, bring all parts of the wing neatly
together so that nothing can or lost or mixed
up.
1
Introduce the wing connector into both wings
and slide together.
CAUTION: A great deal of
force might be needed for this. Make sure that
the wing is not damaged by this. We recom-
mend you enlist the help of a second person to
hold the opposite wing root.
2
Mount the two wing retainers. These are desi-
gned differently. The cornered retainer must be
fitted at the front, while the rounded retainer
must be fitted at the rear.
3