16
EN
In the last step, mount the Pitot tube on the
wing. The Pitot tube is provided with a magnet
at the factory so that it can be removed for
transport.
7
THE FUSELAGE
To begin with, bring all parts of the fuselage
neatly together so that nothing can or lost or
mixed up.
8
Prepare the tail wheel for installation. Note the
installation direction in the fuselage. The arrow
shows the direction of flight here.
9
Now connect the servos of the pitch elevator
and yaw rudder with a servo-tester. Check the
neutral position.
Secure all screw connections with Loctite.
The linkages must be hooked in fully inside at
both servo-horns.
Leave the servo-tester plugged in so that the
servos remain in the neutral position for the next
construction step.
11
Secure all screws with Loctite and screw the tail
wheel in the fuselage.
10
Summary of Contents for Yak 11
Page 1: ...MONTAGE ANLEITUNG INSTRUCTIONS MANUAL MANUEL D UTILISATION...
Page 32: ......