26 of 33
TIP!
Once the setup connector is connected, the probe
automatically transmits telegrams at a transmission interval
of 1 s to ensure that changes can be immediately detected by
the receiver. After the setup connector is removed, the
telegrams are transmitted again at the set transmission
interval.
Term definition
Probe ID
The probe ID is an unmistakable ID with max. 5 characters which is recognized by
the receiver. The ID can be individually changed, for example, to achieve a better
overview of a system. Ensure that an ID is not used simultanously by two probes
within the reception range to avoid malfunctions.
Transmission interval
This parameter is used to define the time intervals used to transmit data to a
receiver. The setting of the "Transmission interval" parameter affects the battery
service life. For this reason, act with caution and do not only consider the
transmission quality when selecting the interval.
Transmission frequency
The transmission frequency defines the frequency band used to transmit data to a
receiver. The transmission frequency is defined at 868.4 MHz for Europe because
special regulations are defined concerning transmission interval and transmission
capacity for the ISM band (Industrial, Scientific and Medical Band).
Summary of Contents for WTX700 Series
Page 1: ...1 of 33 ...
Page 7: ...7 of 33 1 4 Dimensions 1 4 1 Transmitter 1 4 2 Antenna battery case Ø 30 ...
Page 33: ...33 of 33 ...
