23 of 33
7.4 Probe configuration
This chapter explains the configuration of a probe via the setup program.
Prerequisite being that the probe and the PC are connected via an interface.
7.4.1 Establishing communication
A differentiation is made between two different way of proceeding when
establishing the communication between probe and setup program:
•
Establish the communication with “Device settings assistant”. This is the
case when the setup program is used for the first time (list of devices
empty).
•
Establish the communication without “Device settings assistant”. This is the
case when the receiver/probe and setup program have already
communicated (list of devices with entries).
7.4.2 Reading current probe parameters
How to proceed:
Step
Activity
1
In the "File" menu select the "New" function. The "Device assistant"
starts.
2
Confirm the "User-defined setting" by pressing the "Continue" button.
3
Select the "Frequency band" and confirm with "Continue".
4
Select the receiver variant and confirm by pressing "Continue".
5
Exit the overview of the selected settings by pressing "Finish". The
current settings are displayed in the setup program.
6
Select the desired probe from the navigation tree by clicking with the
left mouse key.
7
In the "Data transfer" menu select the "Data transfer from device"
function.
8
Exit the inquiry "Save file" by selecting "Skip". The current probe
parameters are downloaded to the setup program.
Summary of Contents for WTX700 Series
Page 1: ...1 of 33 ...
Page 7: ...7 of 33 1 4 Dimensions 1 4 1 Transmitter 1 4 2 Antenna battery case Ø 30 ...
Page 33: ...33 of 33 ...
