Status Instruments WTX700 Series, Operating Manual

Page: 24 / 33

24 of 33
7.4.3 Editing probe parameters
How to proceed:
Step Activity
1 Select the probe to be edited from the navigation tree by double
clicking with the left mouse key. The "Probe configuration" is opened.
2 Edit the desired parameters.
3 Confirm editing with "OK".
4 Save the parameters in the "File" menu with the "Save" function.
7.4.4 Transmitting new parameters to the probe
How to proceed:
Step Activity
1 In the "Data transfer" menu select the "Data transfer to device"
function. The current parameters are transmitted to the probe
2 Finish the communication between setup program and probe in the
"Data transfer" menu using the "Disconnect connection" function.