Statpower Prosine 2.5 Owner'S Manual Download Page 4

PROsine 2.5/3.0 Advanced Control System (ACS) Owner’s Manual

 1

1. Introduction

W

ARNING

Please review the Important Safety Instructions found at the beginning of the
PROsine Inverter•Charger

 

Owner’s Manual and Installation Manual, paying

particular attention to the CAUTION and WARNING statements, before
proceeding with the installation and operation of the PROsine ACS.  If you
have misplaced these manuals, please contact Statpower Customer Service
for replacement.

The Advanced Control System (ACS) Panel enables you to monitor and control
your PROsine Inverter•Charger from a remote location and comes standard with a
50 foot (15 metre) 4 conductor telephone cord.  The ACS Panel provides you
with a finer degree of both monitoring and operating control over the standard
Control Panel shipped with the PROsine 2.5 Inverter•Charger.  If you purchased a
PROsine 3.0, it comes standard with the ACS Panel in place of the standard
Control Panel.  The digital readout of the ACS gives you a detailed display of
many parameters for the system, while the menu structure allows advanced
configuration as well as the convenience to change system settings when you
need to.  Configuration settings made with the ACS Panel will over-ride those
settings made by configuring the DIP switches on the chassis of the PROsine
Inverter•Charger.

1.1. LCD 

Display

The ACS Panel has a two-line LCD display with backlight to facilitate reading.
You can cycle the LCD panel through a menu tree of items that provides both
system display information and adjustable parameters.  Some display screens
allow you to set parameters and some screens have parameters that can be set
only by the installer after a key sequence has been entered that allows access to
these settings.  Refer to Section 2.3.

The backlight for the LCD panel illuminates when any key on the ACS is pressed.
The backlight will remain on for one minute after the last key press, or after a
warning has been displayed.

1.2. 

ACS Control Panel Functionality

The following diagram and tables will help you get familiar with the buttons and
LEDs on the ACS Panel and their functionality.

Summary of Contents for Prosine 2.5




















Reviews: