Statpower Prosine 2.5, Owner'S Manual, Page: 10 / 19

PROsine 2.5/3.0 Advanced Control System (ACS) Owner’s Manual 7
The following “tree” illustrates the top level screen and the secondary level menu
items:
2.2. PROsine ACS Menus
The following section will take you through each menu option of the ACS panel,
illustrating LCD display information and providing a description of the displayed
parameter. In addition, the parameters will be identified as USER or
INSTALLER selectable with the parameter range of values also being identified.
2.2.1. AC INFORMATION
MENU OPTION DISPLAY DESCRIPTION
- PROSINE -
BAT: 13.4V +90A
SELECT FROM:
AC INFORMATION
SELECT FROM:
BATTERY
SELECT FROM:
INVERTER
SELECT FROM:
CHARGER
SELECT FROM:
SYSTEM INFO
SELECT FROM:
STATPOWER INFO
SELECT FROM:
AC INFORMATION AC INFORMATION:
OUTPUT:
120 Vac
AC INFORMATION:
OUTPUT:
5.75 A
AC INFORMATION:
INPUT:
0 Vac
AC INFORMATION:
INPUT:
0.00 A
BREAKER SIZE:
SET AT:
30 A
Display information only – output voltage if
in inverter mode
Display information only – output current if
in inverter mode
Display information only – input voltage if
AC power is connected and available
Display information only – input current if
AC power is connected and available
USER SETTABLE : from 5 to 30 amps in 1
amp increments to match the AC service
breaker the unit is connected to. This setting
can limit the maximum charge current.