manualshive.com logo in svg

StarTech.com ST12MHDLAN2K, User Manual, Page: 3 / 38

Share
Download
StarTech.com ST12MHDLAN2K User Manual Download Page 3

2

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Use of Trademarks, Registered Trademarks, and other 

Protected Names and Symbols

This manual may make reference to trademarks, registered 

trademarks, and other protected names and/or symbols of 

third-party companies not related in any way to StarTech.com.  

Where they occur these references are for illustrative purposes 

only and do not represent an endorsement of a product or 

service by StarTech.com, or an endorsement of the product(s) 

to which this manual applies by the third-party company 

in question.  Regardless of any direct acknowledgement 

elsewhere in the body of this document, StarTech.com hereby 

acknowledges that all trademarks, registered trademarks, 

service marks, and other protected names and/or symbols 

contained in this manual and related documents are the 

property of their respective holders.

For the State of California

WARNING: Cancer and Reproductive Harm 

www.P65Warnings.ca.gov

Summary of Contents for ST12MHDLAN2K







































Reviews:

No comments