10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Installation
1.
Set up an
HDMI Video Source Device
(e.g. computer) and
an
HDMI Display Device
in the desired location.
2.
Position the
HDMI Transmitter
near the
HDMI Video
Source Device
you set up in step 1.
3.
Connect an
HDMI Cable
from the
HDMI Video Source
Device
to the
Video In Port
on the back of the
HDMI
Transmitter
.
Note:
If you are using a Locking HDMI Cable, use a Phillips
Head Screwdriver to remove the screw above the Video Port.
Connect an HDMI Cable to the Video In Port on the back of
the HDMI Transmitter, and re-insert the Locking Screw into
the Locking Screw Hole. Using the Phillips Head Screwdriver,
tighten the Locking Screw. Be careful not to over-tighten.
4.
Position the
HDMI Receiver
near the
HDMI Video Display
Device
you set up in step 1.
5.
Connect an
HDMI Cable
from the
Video Out Port
on the
back of the
HDMI Receiver
to the
HDMI Video Display
Device
.
Notes:
To connect additional HDMI Receivers (sold sepa-
rately), repeat step 5.