20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
StarTech.com Wall Control App
General Navigation and Operation
You can access the StarTech.com Wall Control app software
menu from any screen by clicking the
Menu
icon in the top
right-hand corner of the screen.
From the menu you can access each of the options below.
Help:
Lists information and walkthroughs regarding operation
of the application.
Device Search Mode:
Enables you to define your preferred
method of identifying the Transmitter and Receiver on
the network. You can choose between two methods of
identification, Multicast DNS or Target IP.
Multicast DNS:
is the default setting and will search
automatically for devices over the network.
Target IP:
is an advanced setting that enables you to specify
an IP address that the remote devices are set to, in order for
the software to identify them. This is a good option if you’d
like multiple setups with different displays and transmitters on
different subnets and IP address ranges.
Clear All Settings:
Restores your software to default settings.
Demo Mode:
Creates a virtual environment with multiple
Transmitters and Receivers that enables you to configure a
virtual setup without physically connecting the Transmitters or
Receivers, to test the functionality.