12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Audio Out Port (Transmitter)/Audio In Port (Receiver):
If you intend to transmit an audio signal from the
HDMI
Receiver
to the
HDMI Transmitter
.
1.
Connect a
3.5 mm Audio Cable
to the
Audio In Port
on the
HDMI Receiver
and connect the other end of the cable to
the
Audio Device.
2.
Connect a
3.5 mm Audio Cable
to the
Audio Out Port
on
the
HDMI Transmitter
and connect the other end of the
cable to the
Output Device
.
Connect the Devices to a Gigabit LAN Network
The
HDMI Transmitter
and
HDMI Receiver
can be used
in a video wall or point to multi-point or point-to-point
configuration over a Gigabit LAN.
1.
Connect a
CAT5e/CAT6 Cable
to the
LAN Port
on the
HDMI
Transmitter
.
2.
Connect the other end of the
CAT5e/CAT6 Cable
to a
Gigabit LAN hub, router or switch.
3.
Connect a
CAT5e/CAT6 Cable
to the
LAN Port
on the
HDMI
Receiver
.
4.
Connect the other end of the
CAT5e/CAT6 Cable
to a
Gigabit LAN hub, router or switch.
Note:
Your router must support IGMP snooping. Please refer
to your network switch or router documentation to ensure
IGMP snooping is supported and enabled.
5.
Verify that the image from your
Video Source
appears on
the
Display Devices
attached to the
HDMI Receiver
(s).