13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Using the RJ-11 to RS-232 Adapters
The
RJ-11 to RS-232 Adapter
can be used to connect a
Serial
Device
to either the
HDMI Transmitter
or
HDMI Receiver
.
1.
Connect an
RJ-11 Cable
to the
Serial 2 Aux/Ext Port (RJ-
11)
on either the
HDMI Transmitter
or
HDMI Receiver
.
2.
Connect the other end of the
RJ-11 Cable
to the
RJ-11 Port
on a
Adapter
.
3.
Plug the
RS-232 Connector
on the
Adapter
into an
RS-232
Port
on the
Serial Device
.
Note:
When connecting the RS-232 connector on the Adapt-
er to the Serial Device you may need to use an additional
serial cable or adapter.
Installing the IR Receiver and IR Blaster
The
IR Receiver
and
IR Blaster
can be connected to either the
HDMI Transmitter
or
HDMI Receiver
.
HDMI Transmitter:
If the device receiving the IR signal is at the
HDMI Receiver
side:
1.
Connect the
IR Receiver
to the
IR In Port
on the front of the
HDMI Transmitter
.
2.
Position the
IR Receiver
where you’ll point your
IR Remote
Control
.