i95 LUX, i95, i95 ECO
Label registration
Switch the immobilizer to the device registration mode (see page
48). Then, perform the following actions:
1) Press the button and, while holding it, place the battery inside.
Hold the label button for at least 3 seconds, then release it.
2) If the label has been registered successfully, the LED produces
several green flashes. Their number would then be equal to
the overall quantity of the registered labels. In case of a
registration error (i.e., if the ignition is turned off before the
sequence is finished), the LED will flash in red.
3) To switch the label to the normal operation mode, remove and
place back the battery.
4) Repeat 1) and 3) for all other labels being registered.
5) Turn off the ignition to exit the device registration mode.
CAUTION!
All the required labels should be registered
consequently and within one programing cycle. When
the first label is registered, data on all previous labels is
automatically removed. The immobilizer allows
registration of up to 4 labels.
52
Label button
Release the button in 3
seconds after the battery
has been inserted into
the new label
Registration
confirmation with label
number indication
Label power supply
Insert battery
Label LED
Locking module
N times
In device registration mode
