ErgoOne
®
User Manual
15
English
Maint
enanc
e
ErgoOne® is a low maintenance pipette. However, individual working
methods, length of application and internal quality control guidelines
mean that regular monitoring and maintenance of your pipette is
necessary.
Note:
If you make any changes to the pipette or replace individual
parts, a check with recalibration is required. If the pipette cannot be
calibrated successfully or if a fault continues, contact STARLAB.
A
For removing and replacing the seals
on the 100µl and 1000µl models
B
For removing and replacing the seals
on the 200µl model
C
For loosening the lower housing of
pipettes up to the 1000µl model
Disassembly and cleaning up
to the 1000µl model
•
Fully depress the tip ejector
button
2
and pull the tip ejector
5
down (Fig. 4).
•
Carefully unscrew the tip holder
7
by turning the auxiliary tool
12
clockwise (ErgoOne® 5ml tip
holder can be removed without
the auxiliary tool).
7. Maintenance
The figures shown below refer to the 200µl model. They may differ
slightly for other pipette models.The maintenance work is carried out
with the aid of the auxiliary tool supplied (tool not required for 5ml
pipette) (Fig. 3)
A
C
B
Fig. 4
Fig. 3
7.1 Maintaining
Single-Channel Pipettes
