Starkwerk 39067089936, Manual

Page: 13 / 24

13
MANUFACTURER:
SLS PROFISHOP GmbH & Co. KG
Herdweg 40
74523 Schwäbisch Hall
DEAR CUSTOMER,
We wish you lots of fun and success in working with your
new machine.
NOTE:
As per the applicable Product Liability Law, the manu-
facturer of this device will not be liable for damages that
occur in this device or that are caused by this device in
the following cases:
• Improper handling,
• Non-observation of the operating instructions,
• Repair by third parties, unauthorized technicians,
• Installation and replacement with non-original spare
parts,
• Use not in conformity with the manufacturer‘s speci-
fications,
• Failures of the electrical system attributable to non-
observation of the electrical specifications and VDE
clauses 0100, DIN 57113 / VDE0113.
WE RECOMMEND THE FOLLOWING:
Please read the instructions in the present manual care-
fully before using the tile-cutting machine.
Read the Instructions For Use:
Please read the Instructions for Use carefully before set-
ting up, commissioning or intervening in the machine.
Dangerous electric voltage
Caution! Switch off the mains power supply before mak-
ing any intervention in the tile-cutting machine.
Risk from sudden start
Caution! The tile-cutting machine can restart suddenly
after a power failure.
In addition to the safety clauses of this operating instruc-
tions manual, you must also observe the specifications
of your country applicable to the operation of the ma-
chine without fail.
Keep the operating instructions manual in a plastic cover
near the machine, protected against dirt and humidity.
Pass the operating manual / safety instructions on when
you hand over to other people.
It must be read and observed carefully by all machine
operators before starting work on the machine.
Only persons who are trained to use the machine and
who have been instructed about the risks involved
should be allowed to operate the machine. The required
minimum age of workers must to be observed.
GENERAL INSTRUCTIONS
• After removing the packing, check the components
for possible transport damage. In case of complaints,
please inform the delivery agent immediately. Subse-
quent complaints will not be entertained.
• Check the delivery to ensure that it is complete.
• Familiarize yourself with the machine with the help
of the operating instructions manual before using it.
• Use only original parts for accessories as well as con-
sumables and spare parts. Spare parts can be ob-
tained from your retailer.
• Please quote our article numbers as well as type and
production year in all your orders.
SW4700
Delivery scope
Tile-cutter
Cooling water pump
Angle stop
Table extension
4 legs
Handle
Technical data
Dimensions L x W x H
1845 x 440 x 1155mm
Cutting table 400 x 1377 mm
Diamond cutting
disc Ø
230 mm
Water filling quantity
40,0 l
Weight 57 kg
Section data
Max. cutting length
1200 mm
Max. diagonal cutting
length
850 x 850 mm
Max 90° cutting height
40 mm
Max. 45° cutting height 34 mm
Drive
Motor
230 V/50 Hz
Power intake
1200 W
Motor speed 3000 1/min
Insulating material
class
F
Protection type
IP54
Technical changes reserved!
NOISE CHARACTERISTIC VALUES
Noise at the workplace can exceed 85 dB (A). In this
case, noise protection measures are necessary for the
user (wear hearing protection!).
NOISE OUTPUT IN dB
sound power level of L
WA
= 86 dB (A) uncertainly 3 dB (A)
Noise pressure level L
PA
= 72 dB (A) uncertainly 3 dB (A)
according to DIN EN ISO 3744; EN ISO 11201