Starkwerk 39067089936, Manual

Page: 15 / 24

15
1
The operators
Healthy commonsense and caution are factors that can-
not be integrated in a machine. These factors are the
responsibility of the operator. Please consider the follow-
ing:
Prevent body contact with grounded surfaces such as
pipes and radiators. Please be watchful. Do not work at
the machine if you are tired.
Always wear:
• ANSI- approved dust masks.
• Safety glasses
• Hearing protection.
Do not stretch yourself over running machines.
ADDITIONAL INSTRUCTIONS
FOR LEAKAGE CURRENT CIRCUIT-BREAKER.
Please observe the following important instructions on
start-up and handling.
Pay attention to the instructions even if you hand over
the
product to a third party. Preserve this operating Instruc-
tions
manual for subsequent reference.
SAFETY INSTRUCTIONS!
•
Arbitrary alteration and/or modification of the product
is not allowed for safety- and approval reasons (CE).
Never dismantle the product.
• The product is not suitable for handling by children.
Children cannot assess the risks involved in handling
electrical devices. Therefore, pay special attention to
the presence of children.
• The structure of the product corresponds to Protec-
tion Class 1. Only a proper mains socket with an earth
wire (230V~/50Hz) of the public power supply should
be used.
• In industrial equipment, the Accident Prevention Spec-
ifications of the Federation of Trade Associations for
Electrical Systems and Resources must be observed.
• In schools, training centres, hobby- and self-help work-
shops, the operation of the product must be monitored
responsibly by trained staff.
• Handle the product carefully. Impacts, hits and drops
from even low heights can damage the machine.
• Never use the product if it is brought from a cold to a
hot room. Under certain circumstances, the resulting
condensed water can destroy the product.
• Let the product come to the room temperature, before
connecting it to the mains power supply. Under certain
circumstances, this can take several hours.
• Do not hold the product with moist or wet hands.
• Ensure that the Insulation of the entire product is nei-
ther damaged nor destroyed.
• If the product is not operated over long periods, dis-
connect it from the mains power supply, pull the plug
out of the socket.
• Avoid the following environmental conditions at the in-
stallation site or during transport.
• Wetness or very high humidity. Extreme cold. Dust or
combustible gases, vapours or solvents. Strong vibra-
tions.
• Strong magnetic fields as in the vicinity of machines or
loudspeakers.
m
Proper use
The machine corresponds to the valid EU Machine
Directive
• Before starting work, all the protection- and safety de-
vices must be installed on the machine.
• The machine is designed for operation by one person.
The operator will be responsible for the presence of
third persons in the work area.
• Observe all safety- and danger instructions on the
machine.
• Keep all safety and danger instructions near the ma-
chine in complete and readable form.
• The machine is designed exclusively for cutting small
and medium-sized tiles (glazed, ceramic or similar
tiles) with the offered tool and accessories. Cutting of
metal and wood is not allowed.
• The dimensions of the workpieces to be machined
should not exceed or fall below the specified maximum
and minimum dimensions.
• Please use the machine only if it is in a technically
fault-free condition. Use It properly, conscious of the
involved safety and risk factors and giving due con-
sideration to the operating instructions manual! Faults,
especially those that can affect safety must be recti-
fied immediately!
• The safety-, workplace- and maintenance specifica -
tions of the manufacturer as well as the dimensions
specified in the technical data must be observed.
• The applicable accident prevention measures and the
other generally recognized technical safety rules must
be observed.
• The machine must be used, serviced or repaired only
by persons who are familiar with it and who have been
briefed about its risks. Arbitrary alterations to the ma-
chine will make the liability of the manufacturer for
damages resulting there from null and void.
• The machine may be used only with original accesso-
ries and original tools of the manufacturer.
Despite proper use, certain residual risk factors cannot
be eliminated fully. The following things can occur, de-
pending on the design and structure of the machine:
• Intervention in the running diamond cutting disc.
• Contact with the diamond cutting disc in exposed area.
• Ejection of work pieces and work piece components.
• Ejection of a faulty diamond attachment in the cut-
ting disc.
• Hearing damage due to non-use of the required hear-
ing protection.
• Injuries to the eyes due to non-use of eye protection
Any use beyond the one specified will be treated as im -
proper. The manufacturer will not be liable for damages
resulting from such improper use; the risk will be borne
by the user alone.