Starkey Hearing Technologies Control Surface BTE 312, Operation Manual

Page: 27 / 40

Hearing Aid Care | 27
Standard Tubing
1. Separate the custom earmold
from the BTE by gently
pulling the tubing away from
the earhook.
– Use a soft, damp cloth or
a cleaning brush to clean
debris from the custom
earmold.
– Wash the custom earmold
with warm soapy water.
– Never use solvents.
2. Slide the custom earmold
tubing onto the BTE earhook
when completely dry.
Your hearing professional can provide further
information on additional maintenance procedures
for your hearing aid if needed.
Thin Tubing
1. Unscrew the tubing from the
tip of the hearing aid.
2. Thread the cleaner through
the tubing, starting at the end
just removed from the hearing
aid, until it extends from the
other end of the tubing.
1
2
1