B
A
20 | Operation
Combined Volume and Memory Control
Combined Rocker Switch
Volume and Memory Control
Your hearing aid is set up to adjust
volume and programs. To adjust
volume, press then release the
switch (up to increase and down to decrease).
To change programs, press and hold the switch
(either up or down to cycle). The hearing aid will
cycle through the programs and present indicators.
Release the switch when you are at the desired
program. The upper part of the switch increases
volume and advances through programs. The
lower part of the switch decreases volume and
reverse cycles through programs.
Combined Sweep Volume and
Memory Control
Your control surface is set up to
allow changes for both volume and
memory/program. To make sounds
louder, sweep your finger from B to A.
Your hearing aid uses the following controls:
Combined Rocker Switch Volume and
Memory Control.
Combined Sweep Memory and
Volume Control.
Summary of Contents for Control Surface BTE 312
